D25 amplifier
Equalizer
2 x 16-band
PEQ/notch/shelving/asymmetric
PEQ/notch/shelving/asymmetric
Latency analog and digital inputs
0.3 ms
Delay setting
0.3 ms – 10 s
Configurations
A list of d&b loudspeakers supported by the 25D is included in the Release notes of the amplifier firmware.
Function switches
d&b loudspeaker specific circuits
Frequency generator
Pink noise or Sine wave 10 Hz – 20 kHz
- Maximum output power 4 x 1800/900 W into 4/8 Ω
- Maximum output voltage/current 120 Vpeak / 35 Apeak
- Operating and Monitoring display, colour TFT touchscreen, 4.3″ / 480 x 272 pixel
- Milan-enabled
Equalizer
2 x 16-band
PEQ/notch/shelving/asymmetric
PEQ/notch/shelving/asymmetric
Latency analog and digital inputs
0.3 ms
Delay setting
0.3 ms – 10 s
Configurations
A list of d&b loudspeakers supported by the 25D is included in the Release notes of the amplifier firmware.
Function switches
d&b loudspeaker specific circuits
Frequency generator
Pink noise or Sine wave 10 Hz – 20 kHz
Sản phẩm tương tự
- Maximum output power 4 x 5400/2700 W into 4/8 Ω
- Maximum output voltage/current 210 Vpeak / 78 Apeak
- Milan enabled
- All current d&b loudspeaker setup
- Maximum output power 4 x 4000 W into 4 Ω
- All current d&b loudspeaker setups
- Display Colour TFT touchscreen, 3.5"/320 x 240 pixel
- Maximum output power 4 x 2400/2000 W into 4/8 Ω
- Maximum output voltage/current 180 Vpeak / 35 Apeak
- Operating and Monitoring display, Color TFT touchscreen, 4.3" / 480 x 272 pixel
- Milan-enabled
- Maximum output power 4 x 2400/2000 W into 4/8 Ω
- Monitoring display, Color TFT touchscreen, 4.3" / 480 x 272 pixel
- 12 configurable GPIOs (8x GPI, 4x GPO)
- Milan-enabled
- Maximum output power 4 x 1800/900 W into 4/8 Ω
- Monitoring display, colour TFT touchscreen, 4.3" / 480 x 272 pixel
- 12 configurable GPIOs (8x GPI, 4x GPO)
- Milan-enabled
- Maximum output power 4 x 1600 W into 4 Ω
- All current d&b loudspeaker setups except SL-Series
- 5 freely assignable GPIOs (General Purpose Input Output) + General fault
- Maximum output power 4 x 700 W into 4 Ω
- All current d&b loudspeaker setups except A-Series, J-Series, SL-Series, V-Series, M2, B22-SUB
- 5 freely assignable GPIOs (General Purpose Input Output) + General fault
Selected loudspeakers from E-Series, xS-Series, xC Series, T-Series; Linear setup